Aluminum Round Disc
Aluminum round disc also named aluminum discs, aluminum circles, this is wildly used for producing cookware, utensil, pizza pan, pressure cooker, bakeware, road sign and traffic sign.
What’s the information of aluminum aluminum round disc?
Alloy Number: 1050,1060,1100,1200,3003,
Temper: O, H12, H14, H16, H18, soft
Surface treatment: Mill finish, non-stick surface,
Thickness: 0.2mm- 8mm
Diameter: 30mm-1360mm
Packaging: Wooden pallets and wooden box, wooden case
Delivery time: 20 Days
Bezahlung: T/T, L/C bei Sicht
MOQ: 500KGS per size
Runde Aluminiumscheibe
round aluminum plate
Our aluminum round disc are produced with by 99.7% pure aluminum ingot, so our aluminum circle without orange peel problems when you spinning or deep drawing.Our quality is good for deep drawing, spinning. So it is wildly used for cookware. aren’t made by aluminum scrap.
Properties of the aluminum round disc
|
Standard: ASTM-B209 ; GB/T3880-2012, EN485 |
||||||||||
|
Chemistry Composition |
||||||||||
| Legierung | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti |
Al |
| 1060 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | 0.05 | 0.03 | 99.6 | ||
| 1050 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | 0.05 | 0.03 | 99.5 | ||
| 1100 | 0.95 | 0.05-0.2 | 0.05 | 0.1 | 99.0 | |||||
| 1200 | 1.0 | 0.05 | 0.05 | 0.1 | 0.05 | 99.0 | ||||
| 3003 | 0.6 | 0.7 | 0.05-0.2 | 1.0-1.5 | 0.1 | Restbetrag | ||||
|
Mechanical Properties |
|||||
| Temperament | Anti –tensile strength
N/m㎡ |
Elongation rate（%） |
Maßkontrolle | Oberfläche | Verpacken |
| O(soft) | 78Mpa (8Ksi -12Ksi) | 35
(above 2.5 Ksi) |
Qualifiziert | Qualifiziert | Qualifiziert |
| H12(H22) | 95Mpa
(11Ksi – 16Ksi) |
18
(above 9 Ksi) |
Qualifiziert | Qualifiziert | Qualifiziert |
| H14(H24)
(Half – hard) |
123Map
(12Ksi – 17Ksi) |
7
(above 9 Ksi) |
Qualifiziert | Qualifiziert | Qualifiziert |
| H18
(Full Hard) |
140
(above 16Ksi) |
4
(above 10Ksi) |
Qualifiziert | Qualifiziert | Qualifiziert |
Aluminum round disc application and usage:
Deep drawing cookware, spinning cookware, kitchen utensils，pizza pan, pressure cooker, bakeware, road sign, Building Material,Insulation, traffic sign,etc. aluminum Non stick cookware、for cookware bottom、for non-stick cookware、for non-stick pan、for non-stick pan、for kitchenware etc.
Runde Aluminiumscheibe price per kgs
The aluminum circles price changes everyday and it depends on the market. FYI, today our aluminum circles price is 2.30USD per kg. Our MOQ is 500KGS per size.
| ALLOY | CC-Material | DC-Material | Zeit produzieren | MOQ | 1 x20FCL | 1 x40FCL |
| 1050 | FOB 2.30USD/KGS | FOB 2.48USD/KGS | 25 Tage | 500KGS jede Größe | 27 Tonnen | 28 Tonnen |
| 1060 | FOB 2.30USD/KGS | FOB 2.48USD/KGS | ||||
| 1100 | FOB 2.30USD/KGS | FOB 2.48USD/KGS | ||||
| 1200 | FOB 2.30USD/KGS | FOB 2.48USD/KGS | ||||
| 3003 | FOB 2.36USD/KGS | FOB 2.48USD/KGS |
Aluminum round disc packing and loading:
Standard seaworthy export packing – the height of the pallet is 90mm, suitable for unloading with forklift. For 1 x 20FCL can load 27 Tons.
FAQ:
1.Q:Do you produce large aluminum round discs? What’s the max diameter disc you can produce?
A: Yes, we can produce large aluminum discs. We have 2 circular cutting machines and 5 dies pressing machines, the max diameter we can produce is 1500mm.
2.Q: What’s the different of CC aluminum round discsand DC aluminum round discs?
A: CC aluminum circles means Continuous Cast. The Manufacturing Process is Aluminum ingot – Melting – Continuous Casting – Coil – discs – Packing.
DC aluminum Circles means Direct casting. The Manufacturing Process is Aluminum ingot – melting – Square Billets – Direct casting- coil – discs.
As we all know that, many customer use our aluminum circles for cookware and utensil. There are 2 ways to make cookware-Pressing and Spinning. If you do spinning, use CC material, if you do pressing(DDQ) deeper than 150mm,please use DC material.
3. How to calculate the aluminum round discs weight per pieces?
There is a formula to calculate the weight per piece as below:
2.13*Thickness( mm)* diameter(m)*diamter(m) = 1 pc weight
We will take 1.2*710 mm as example: 2.13*1.2*0.71*0.71 = 1.2885kgs( 1.2884796)
4.What kind of Temper should be used?
Temper means hardness, temper O is fully annealed aluminum round discs, the softest temper,H12/H22 is 1/4 hard, H14/H24 is half hard, H18 is full hard.
Temper O usually to make bodies, H14 usually to make lids/covers
Some customers use O to make lids with very thick aluminum circles, as they worry about that if use thin one, strength will be not enough, so every time, I suggest them to use H14, or other harder temper than O. And then you can use thinner thickness than before. This will save a lot cost for them.
