Mill finish aluminum sheet is produced from the mill directly.It is natural appearance of the aluminum, no further treatment on the surface, no embossed, no color coated, nor brushed or anodizing. Aluminum sheet are produced with cold rolling machine or hot rolling machine, from aluminum ingot to aluminum coil, we always have special clean the roller which will make the aluminum surface more bight. Beside mill finish aluminum sheet, we can also produce polish surface, mirror finish aluminum sheet.

Mill finish aluminum sheet information:

Alloy Number: mill finish aluminum sheet 1100, 3003, 5052, 5754, 5083, 6061

Temper: O, H14, H24, H26, H18,T6, T651, H34, H32, H111,

Обработка поверхности: Фрезерная обработка, с одной стороны голубые ПВХ пленки, с обеих сторон голубые ПВХ пленки, бумага с вставками

Толщина: 0,2 мм - 100 мм

Width: 500mm to 2600mm

Максимальная длина: 11,8 метров или быть катушки, если в форме катушки, наш ID составляет 508 мм, максимальный OD: 1600 мм;

Упаковка: Стандартная морская упаковка экспорта

Срок поставки: 15 дней

Payment: T/T, L/C at sight, D/P 30 Days;

Stock Size: 1000MM, 12500MM, 1500MM, 4’’ x 8’’,

Mill finish ALUMINUM SHEET PACKING AND LOADING:

Морская упаковка должна быть защищена от влаги.

Упакуйте, чтобы избежать попадания влаги

Heat# должны быть записаны на всех связках

Не смешивайте нагревательные элементы в пучках

Комплектуйте отдельные размеры по отдельности

Прозрачный или голубой пвх 2-3 мил средней липкости с одной стороны.

Critical surface quality: No chatter, no pitt marks, no weld, no stains accepted;

Mill finish aluminum sheet price per sheet / per kgs

The mill finish aluminum sheet price changes everyday and it depends on the market.

Вот наша цена алюминиевого листа за сом для вас:

1. Does mill finish aluminum rust?

Aluminum is one of the most important metals in the world. It don’t get rust, that makes the mill finish aluminum sheet better than steel. Especially the aluminum surface is very easy to form one anodize film and it will protect the surface from rust very well.

2. What color is mill finish?

The mill finish aluminum is do not have any further treatment after rolling from the mill. The surface have no color or we can call it natural color. So it it raw material from the mill.

3. What’s the meaning of aluminum sheet?

Aluminum sheet is flat-surfaced products, coiled or not, of solid rectangular(other than square) cross-section with or without rounded corners of a uniform thickness which of rectangular (including square) share with a thickness not exceeding one-tenth of the width. For thickness above 0.2mm to 6.0mm named aluminum aluminum sheet, for thickness above 10mm always be called aluminum plate; for thickness below 0.2mm always named aluminum foil.

4. What’s the thickness tolerance on aluminum sheets?

According to the GB/T3880-2012 standard, the thickness tolerance of cold rolled plate and strip is divided into ordinary grade and high precision grade. The thickness is approximately equal to 4.0mm, 5A05, 5A06 and other alloys with magnesium content of more than 3%, the thickness of the ordinary grade deviation of the nominal thickness of +/-5% of the sequential deviation. Our factory can control the thickness tolerance: +/-0.02mm, Width & Length tolerance:  -0 / +2mm. Diagonal line (+/- 2mm).